Contact Us
If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.
Tecnico Internacional
gt-licenciaste@fermax.com
6
Article
Last Month
KIN Panel installation
Published May 9th, 2025 by Tecnico Internacional
Description [Meet panel] Description note (mifare) NOTE: Residents can access to their corresponding entrance by passing their autho NOTE: Residents can access to their corresponding entrance by passing their authorized Mifare identifier(not available for 7-byte cards).. The door will open and release the lock. The Mifare identifier data must be add
Marine/Milo panel installation
Published May 8th, 2025 by Tecnico Internacional
Description The Milo Digital Panel (ref: 1832) and the Marine Panel (ref: 1455) share the same firmware. Therefore, the configuration sections of the manual are common. For a quick view of the panel’s hardware, please select the desired panel below: MARINE PANEL REF. 1455 V03.70 MILO DIGITAL VIDEO PANEL POE MEET REF. 1832 V03.70 [Meet panel]
Installer meet guard unit
Published September 11th, 2025 by Tecnico Internacional
Product Introduction The following document is the installer manual for the FERMAX MEET Guard Unit, corresponding to the ref.95391 with firmware V03.70. It is required, when installed in v3.0 MEET installations, to enable “Backward compatibility” function via webserver to ensure the Guard Unit is compatible with the installation. See chapter 3.2 Gen
Milo 1W Panel
Published May 12th, 2025 by Tecnico Internacional
Description [Meet panel] Description note (mifare) NOTE: Residents can access to their corresponding entrance by passing their autho NOTE: Residents can access to their corresponding entrance by passing their authorized Mifare identifier(not available for 7-byte cards).. The door will open and release the lock. The Mifare identifier data must be a
WIT A10/A Monitor Installer
Published May 8th, 2025 by Tecnico Internacional
Description The following document is the Installation Manual for the FERMAX MEET range monitors, corresponding to WIT A10/A monitor V03.70. Installation Stand placement [Meet monitor installation] Stand placement Before installing the MEET monitor, the corresponding installation stand must be Before installing the MEET monitor, the corresponding
NEO MONITOR USER MANUAL
Published April 14th, 2025 by Tecnico Internacional
Description The following document is the User Manual for the NE O 7’ m onitor and firmware V03.70 The layout and quantity of icons in the main menu depends on the installer configuration. Call Reception Calling from a panel Calling from a panel MEET monitors can receive calls from both the outdoor panels of the block corresp MEET monitors can recei
NEO Monitor Installer
Published May 7th, 2025 by Tecnico Internacional
Description The following document is the Installation Manual for the NEO 7’ MEET monitor, with firmware V03.70 Installation Stand placement [Meet monitor installation] Stand placement Before installing the MEET monitor, the corresponding installation stand must be Before installing the MEET monitor, the corresponding installation stand must be pla
Load More