• Contact Us
English (US)
ES Spanish
GR Greek
PL Polish
DE German
US English (US)
PT Portuguese
NL Dutch
FR French
RU Russian
IT Italian
  • Home
  • MEET
  • Shared functions MEET panels

[Meet panel M+K] SIP webserver

Written by Tecnico Internacional

Updated at November 18th, 2026

  • MEET
    Monitors Shared functions MEET monitors Panels Shared functions MEET panels Guard Unit Others
  • DUOX
    Monitors
+ More

Configuration for smartphone call divert, using FERMAX MEET ME APP                                                    

图形用户界面, 应用程序

描述已自动生成

ENABLE SIP: Select this box to enable SIP functions.

  • SEARCH SIP STATUS: this button appears when enable SIP function, show SIP REGISTERED if the panel register successfully or SIP REGISTER FAILED if the panel register unsuccessfully.

SIP SERVER: Use the FERMAX MEET server -> sip: sip.fermax.com.

DOMAIN: Indicate the server domain -> sip.fermax.com.

OUTBOUND: Not necessary. Leave it in blank.

STUN IP: Not necessary. Leave it in blank.

STUN PORT: Not necessary. Leave it in blank.

H.264: Leave the default value: 102

TRANSPORT: UDP, TCP, TLS options. Default UDP, the No. port of UDP is 5060, the default port is 5060 if no port at the back sip:sip.fermax.com, the No. port of UDP is 5223, the No. port of TLS is 4443

The panel will reboot when the transport is be changed.

SIP USER, SIP PASSWORD: Indicate the user and password of the FERMAX MEET ME licence assigned to this panel. They are indicated in a label attached in the front of the panel.

CONVERSATION, RING TIME: No function.

Configuration for SIP server integration                                                                                                                   

Configure the SIP parameters as explained below, for the cases where the panel works as an extension of a SIP server

图形用户界面

描述已自动生成

Contact with the SIP server administrator to get some of the information required in this section.

ENABLE SIP: Select this box to enable SIP functions.

SEARCH SIP STATUS: this button appears when enable SIP function, show SIP REGISTERED if the panel register successfully or SIP REGISTER FAILED if the panel register unsuccessfully.

SIP SERVER: Indicate the sip SERVER address. Format -> sip: IP_SERVER.

DOMAIN: domain of the SIP server or IP address

OUTBOUND: Not necessary. Leave it in blank.

STUN IP:  domain of the SIP server.

STUN PORT: Used for the configuration of Internet SIP server-based installations. It is usually port 5060.  Check with your network or SIP server administrator.

H.264: Depends on the SIP SERVER. In the case of doubt, leave the default value (102).

TRANSPORT: UDP, TCP, TLS options. Default UDP, the port need match with port of sip server,

The panel will reboot when the transport is be changed.

SIP USER, SIP PASSWORD: Indicate the user and password that this terminal is programmed in the SIP server.

CONVERSATION, RING TIME: No function.

 

 

board m k conference server

Download Article

Related Articles

  • [MEET panel] Firmware updates
  • [Meet panel M-K] Web browser programming
  • [Meet panel M+K] Device webserver
  • [Meet panel] General entrance panel webserver
  • [Meet panel] Block Panel Entrance webserver

For more information, visit www.fermax.com
Contact: tec@fermax.com www.fermax.com/contact

Fermax logo

FERMAX ELECTRONICA S.A.U

Avenida Tres Cruces, 133
46017 Valencia, Spain

Expand