[Meet monitor] Connection with an access panel
Written by Tecnico Internacional
Updated at November 18th, 2026
It is possible to connect with any access panel in the same block, without having called it previously.
Depending on the characteristics of the installation, this functionality may be deactivated. A "FUNCTION NOT ACTIVATED" message will be displayed.
To connect to a panel, touch the icon
. A list of available panels will appear, after a short SEARCH period of time, while the system is detecting them.
If there were not any panel available, a message NO DEVICE IS FOUND will paperer for 5seconds.
Otherwise, a message UPDATE COMPLETED and a list with the detected panels will appear.
The list of the detected panels is stored in memory, so the next time you need to call a panel, the panel list will appear immediately. However, in the case of the available panels is different than the stored in memory, the list will be automatically updated.
The panel could be identified by a name or a customized tag depending on the installer configuration. Ex. EAST ENTRANCE instead of BLOCK PANEL-01.
Touch the one you wish to communicate with.
Once in communication, the screen will display the image captured by the panel, along with the user controls described below:
Download Article