• Contact Us
English (US)
ES Spanish
GR Greek
PL Polish
DE German
US English (US)
PT Portuguese
NL Dutch
FR French
RU Russian
IT Italian
  • Home
  • MEET
  • Shared functions MEET monitors

[Meet monitor] Alarm Function

Written by Tecnico Internacional

Updated at November 18th, 2026

  • MEET
    Monitors Shared functions MEET monitors Panels Shared functions MEET panels Guard Unit Others
  • DUOX
    Monitors
+ More

Your monitor is a complete alarm centre which, if any of the detectors it controls are triggered, will generate an alarm signal both on the monitor itself (an acoustic signal and the activation of a device) and in the Concierge Guard Unit device and MEET Management Software in the condominium. This alarm signal shall be suitably identified (home and type of detector/alarm triggered).

It can work in any of these 3 modes: 

HOME MODE

 It will be triggered only when it receives a technical alarm signal defined in HOME MODE (flood, smoke, or 24-hour protection zones in general). 

 
 

SLEEP MODE 

In addition to technical alarms, it will also be triggered when it receives an alarm signal from an intrusion detector in a certain area of the house defined in the SLEEP MODE.                                                                          
This is the usual mode of operation when there are people in some part of the house (e.g. bedrooms) and you want to leave other areas protected (e.g. living room, kitchen, etc.). 

 
 

OUT MODE

In addition to previous alarms, it will also be triggered when it receives an alarm signal from an intrusion detector in the home defined in the OUT MODE.                                                                                                               
This is the usual mode of operation when no one is home.

Touch the icon  to arm the alarm system. 

The sequence is as follows: 

Select OUT MODE

When in or  mode, touch the     

The change will be made automatically after 100 seconds, to give you time to leave the protected zone without triggering the alarm.                                                                                                                                                    
The remaining exit time is displayed.

Once the time has elapsed, the monitor will return to the standby screen, displaying an icon indicating the current mode in the upper left corner.

 
 

Select SLEEP MODE (from OUT MODE)

While in mode , touch the icon.

A dialling pad will appear.

Enter the ALARM PIN number and touch the confirmation icon.                                                               

You can also enter the DURESS PIN, which will cause the alarm to be deactivated but will in turn send a duress warning to the concierges.

The change will be made automatically after 100 seconds to prevent the alarm from being triggered if you need to pass through the protected area.                                                                                                                           
The remaining exit time is displayed. 

Once the time has elapsed, the monitor will return to the standby screen, displaying an indicator icon in the upper left corner.

 
 

Select SLEEP MODE OR OUT (from HOME MODE)

While in mode , touch the icon or

The change will be made automatically after 100 seconds to prevent the alarm from being triggered if you need to pass through the protected area.                                                                                                                           
The remaining exit time is displayed.

Once the time has elapsed, the monitor will return to the standby screen, displaying an indicator icon in the upper left corner.

NOTES:
You may have entered the protected zone before accessing the monitor to disarm the alarm. You have a few seconds to perform the disarming process before the alarm is triggered.
The default ALARM PIN is 1-2-3-4 and the DURESS PIN is 4-3-2-1. It can be changed to others of your choice as explained in the "ALARM PIN" section.
The exact functioning of the alarm system depends on the installation and configuration of the equipment by the installer. Contact the installation company.

 
 
 
 

 

nameless piece untitled item

Download Article

Table of Contents

HOME MODE SLEEP MODE OUT MODE Select OUT MODE Select SLEEP MODE (from OUT MODE) Select SLEEP MODE OR OUT (from HOME MODE)

Related Articles

  • [Meet monitor] Calling from a panel
  • [Meet monitor] Icons explanation meet monitor
  • [Meet monitor] Pick up/accept call MEET monitor
  • [Meet monitor] Display of additional cameras meet monitor
  • [Meet monitor] Call from the door of the apartment/home

For more information, visit www.fermax.com
Contact: tec@fermax.com www.fermax.com/contact

Fermax logo

FERMAX ELECTRONICA S.A.U

Avenida Tres Cruces, 133
46017 Valencia, Spain

Expand